Descriptionanchor
Fix A Leak is a blended-concentrated material designed to seal minor leaks in the plumbing. One 8 oz. bottle is effective for hot tubs and spas ranging from 250-1000 gallons (950-3785 liters). Hot tub and spa leaks can be detected by notable water loss not caused by evaporation, a wet spot on the ground, or possibly a slow drip coming out of the foam insulation. If the foam insulation surrounding the tub or spa is saturated with water the hot tub or spa has been leaking for a prolonged period of time.
Feature Bulletsanchor
Bypass FILTER MEDIA before adding FIX-A-LEAK to water. Sand filters: set filter valve to recirculate. Other types: remove cartridges or DE elements from the filter tank. Then proceed
With pump running, add FIX-A-LEAK slowly through skimmer or in front of any other suction intake
After adding FIX-A-LEAK adjust suction to main drain. If this is not possible, the vacuum cleaner could be used alternatively, simply by placing the vacuum in deepest part of pool and connect to normal vacuum connection. Set filter valve to normal vacuum
FIX-A-LEAK is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension, either manually using a pool broom or mechanically with a automated pool cleaner every 4-6 hrs. during circulation of water
Continue to recirculate water until the leak has stopped
Mark level of water in pool and check for 2-3 days to determine if the leak has stopped
After the leak has stopped and given the proper time to cure (24-48 hrs.) you may return to normal filtration. Sand Filters: Set filter valve to filter and resume normal operation. Backwash out unused FIX-A-LEAK as required. Other Types: Reinstall filter
Treatment can be repeated if necessary
